Shop

Sewing on strung beads and pearls has always been a tedious task but the beading feet now go some small way to alleviating this and to add pleasure to embellishing.  Popular bridal wear, evening wear, smart/casual or craft, the beading foot set is a must for your sewing box.

This foot can also be used for attaching similar diameter decorative cords for embellishment.

Blind hem:
1. Fold the fabric up to create the desired hem, then baste about 3/16″ (5 mm) from the edge of the fabric.
2. Fold back the fabric along the basting and position the fabric with the wrong side facing up.
3. Position the fabric with the edge of the folded hem against the guide of the presser foot.
4. Lower the presser foot lever.
5. Select the blind hem stitch.
6. Adjust the stitch width until the needle slightly catches the fold of the hem.
7. Sew.
8. Remove the basting.

Edge stitching:
1. Position the needle at the desired distance from the edge of the fabric and lower needle.
2. Turn the foot guide screw, adjust the fabric guide to the edge of the fabric, and lower the presser.

1. Loosen the screw on the presser foot and insert a braid through the guide before attaching the presser foot on the machine.
2. Slide the plate of the guide back and forth to fit the width of the braid.
3. Tighten the screw and pull the braid behind the presser foot.
4. Attach the presser foot onto the machine.
5. Set the zigzag width slightly wider than the width of the braid.
6. Stitch braid in place.

.

The Sliding Buttonhole Foot is a plastic foot suitable for most makes of machines. By placing your button on top of the foot the machine will sew a perfect buttonhole for you exactly the correct size!